Grain spawn: normal or contaminated? Growth patterns and warning signs

Growbag mit sterilem Weizen für Körnerbrut, Meisterpilze

Quick answer: Healthy grain spawn is white to cream-coloured, grows from the injection sites into the grains and smells fresh and mushroomy. Green, black, grey or orange patches, wet and slimy grains, cloudy liquid or a sour, rotten smell are warning signs of mould or bacteria. Yellow droplets, brownish discolouration in shiitake and thin, almost translucent mycelium in lion's mane, on the other hand, are normal.

If you're making grain spawn for the first time, you'll probably check the bag every day and wonder: is this normal? The answer depends a lot on the species. Some species are very vigorous and form dense white mycelium in no time, others grow slowly, thinly or change colour over time. Here we show you what healthy grain spawn looks like for the most important gourmet mushrooms, which warning signs point to contamination and what you should do then. You'll find the basics of inoculation in our guide to inoculating grain.

What does healthy grain spawn look like?

  • Colour: white to cream-coloured, later brownish in some species.
  • Growth direction: the mycelium grows outwards from the injection sites and wraps around the grains, rather than growing around certain spots.
  • Grains: matt and firm, not wet, shiny or slimy.
  • Smell: fresh, mushroomy, sometimes slightly floury or of aniseed (oyster mushrooms).
  • Speed: first white spots after a few days, visible white areas after about 12–14 days, fully colonised usually after 3–4 weeks at 21–24 °C.

Growth patterns: how differently the species grow

Broadly speaking, mycelium grows in two forms. Rhizomorphic mycelium forms rope-like or fan-shaped strands that spread out radially. Tomentose mycelium is fluffy like cotton wool and grows more evenly. Both are normal, and often both forms appear in the same bag.

  • Oyster mushroom (Pleurotus ostreatus): very vigorous, dense, bright white mycelium, often clearly rhizomorphic. Towards the end, small pins can form inside the bag. That's a sign the spawn wants to be used.
  • Pink oyster (Pleurotus djamor): also fast, rather cottony. Light pink tones and early pins are normal. The tropical pink oyster doesn't tolerate cold: don't put finished spawn in the fridge.
  • King oyster (Pleurotus eryngii): slower, fine, even mycelium. It sometimes takes a little longer before it's ready to shake.
  • Shiitake (Lentinula edodes): rather slow. The mycelium is white at first and over time turns patchy light brown, sometimes with brownish droplets. That's the normal maturing process, not contamination.
  • Lion's mane (Hericium erinaceus): thin, almost translucent mycelium that often looks as if the grains haven't been colonised at all. Small white bumps – the beginnings of the later fruiting bodies – can appear early on.
  • Pioppino / black poplar mushroom (Cyclocybe aegerita): medium-fast, fine white to cream-coloured mycelium, later sometimes slightly brownish, occasionally with early pins.

What's normal and no cause for concern?

  • Yellow or amber droplets on the mycelium: metabolites, often a sign of stress, e.g. from heat or because the spawn has been ready for a while. As long as they're clear, they're harmless.
  • Irregular growth with dense and loose areas, strands and fluff side by side.
  • Sectors: areas where the mycelium looks different from the area next to it. These are genetic variants of the same culture.
  • Light condensation on the bag wall after temperature swings.
  • Pins shortly before or after full colonisation.

Warning signs: is my grain spawn contaminated?

Green or blue-green patches

Almost always moulds such as Trichoderma or Penicillium. Trichoderma is sneaky: it starts as a strikingly fast, fluffy white patch that resembles mushroom mycelium and turns green after one to two days, as soon as it sporulates.

Black, grey or dark spots

Black spots or grey, hairy growth with tiny dark heads point to moulds such as Aspergillus, Rhizopus or Mucor.

Orange or salmon-pink fuzz

An orange to salmon-pink fuzz that grows extremely fast and can even push through the filter is probably Neurospora. Do not open the bag under any circumstances: Neurospora produces huge amounts of spores and spreads quickly through the room. Put the bag inside a second bag, seal it and dispose of it.

Wet, shiny or slimy grains

Bacteria usually don't show up as a colour but as wet, shiny or slimy grains, cloudy, milky liquid between the grains or a greyish edge that the mycelium grows around instead of into. Common causes are wet pockets, when the liquid culture wasn't distributed after inoculation, or too much liquid culture.

Sour or rotten smell

Healthy spawn smells fresh and mushroomy. If the bag smells sour, fermented, like vomit, rotten apples or musty, bacteria or mould are almost always involved. To check, squeeze the bag gently and smell right at the filter.

No growth or stalled growth

If there's still no mycelium to be seen after 7–10 days at 21–24 °C, the liquid culture is too weak or contaminated, or it's too cold. If a bag stops mid-growth or the mycelium recedes, bacteria or overheating are often the cause. Mycelium produces its own heat as it grows, so stacked bags can get much warmer inside than the room.

Water at the bottom or a wet filter

A puddle at the bottom of the bag, lots of condensation or a wet, discoloured filter are caused by too much liquid culture, grains on the filter or large temperature swings. A wet filter is worse at keeping contaminants out.

What to do if your grain spawn is contaminated

  • Don't open the bag, not even to smell it, and don't dispose of it indoors, where spores can be released.
  • Don't try to save the bag: contamination in the grain won't go away, even if the mycelium keeps growing.
  • Don't shake it: you'll spread the contamination through the whole bag.
  • Put the sealed bag inside a second bag and throw it out with the general waste.
  • If you suspect mould, wear an FFP2 or FFP3 mask.
  • Look for the cause: hygiene when inoculating, inoculation amount, temperature. Test your liquid culture beforehand on an agar plate.

Not sure? Send us a photo at team@meisterpilze.de or on WhatsApp +49 157 54040209 (Luis). We'll tell you whether your bag is healthy.

How to prevent problems

  1. Work cleanly: disinfect the injection port, needle and hands.
  2. Dose correctly: 2–5 ml of liquid culture per kg of wheat, a little less if the grains look moist.
  3. Distribute straight after inoculation so no wet pockets form.
  4. Keep the grains away from the filter when shaking.
  5. Store at 21–24 °C, dark and constant, and don't stack bags.
  6. Shake once about 12–14 days after inoculation, but only if there are no warning signs.

FAQ

Is yellow liquid in grain spawn dangerous? Clear yellow or amber droplets are metabolites from the mycelium and usually harmless. Cloudy, milky or foul-smelling liquid, on the other hand, points to bacteria.

My lion's mane barely looks colonised. Is that normal? Yes. Lion's mane forms thin, almost translucent mycelium. Pay more attention to the smell and to whether the grains hold together when you squeeze them.

My shiitake spawn is turning brown. Is it contaminated? No, that's normal. Shiitake mycelium turns light brown over time. Green or black patches, however, would be a warning sign.

Can I still use a contaminated bag? No. Even if only a small spot is visible, the whole bag is usually affected. Dispose of it sealed.

Why has my grain spawn stopped growing? Usually it's bacteria in wet grains, overheating from stacked bags or too low a temperature.

Shop now: sterilised wheat substrate · Shop now: wheat substrate 1 L · Shop now: liquid culture

Want to try it yourself?

We make our grow kits and substrates fresh in Erlangen.

See the grow kits